Innovative Chromatography Products
www.restek.com
www.restek.com
Reference Standards: Single Component Solutions
Looking for a Specific Compound?
Enter an compound name, synonym, or CAS # below.
| Products |
|---|
 |
|
|
|
|
|
|
|
Endrin Aldehyde StandardNOTE: Cat. #s 32463–32468 are dissolved in acetone and replace cat. #s 32219–32224, which were dissolved in methanol. View Product Information |
Endosulfan Sulfate StandardNOTE: Cat. #s 32463–32468 are dissolved in acetone and replace cat. #s 32219–32224, which were dissolved in methanol. View Product Information |
Endosulfan II StandardNOTE: Cat. #s 32463–32468 are dissolved in acetone and replace cat. #s 32219–32224, which were dissolved in methanol. View Product Information |
Endosulfan I StandardNOTE: Cat. #s 32463–32468 are dissolved in acetone and replace cat. #s 32219–32224, which were dissolved in methanol. View Product Information |
Endrin Ketone StandardNOTE: Cat. #s 32463–32468 are dissolved in acetone and replace cat. #s 32219–32224, which were dissolved in methanol. View Product Information |
Endrin StandardNOTE: Cat. #s 32463–32468 are dissolved in acetone and replace cat. #s 32219–32224, which were dissolved in methanol. View Product Information |
|
|
|
|
|
AOAC QuEChERS Triphenylphosphate Solution
View Product Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1,2-diphenylhydrazineNote that 1,2-diphenylhydrazine is an unstable compound that will oxidize to azobenzene, thereby decreasing the concentration of 1,2-diphenylhydrazine over time. For accurate calibration results, it is recommended that the concentrations of 1,2-diphenylhydrazine and azobenzene be combined. Please contact the Restek Technical Service if you have any questions about this issue. View Product Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ammonium Picrate* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
2,4,6-Trinitrotoluene* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
1,3,5-Trinitrobenzene* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
Tetryl* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
RDX* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
HMX* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
Nitroguanidine* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
EGDN* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
PETN (pentaerythritol tetranitrate)* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
Picric Acid* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
Nitroglycerin* (Single-Component Explosives Solution)*Meets all DOT requirements. Available only to customers or distributors inside the 48 contiguous United States; item may not be resold for export. View Product Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QuEChERS Internal Standard Mix for LC-MS/MS Analysis (nicarbazin)Ready to use for QuEChERS extractions—no dilutions necessary. Click here for more information on our QuEChERS products. View Product Information |
AcroleinThis product has a limited shelf life. We recommend that you order only the ampul quantity that meets your immediate needs. View Product Information |
|
|
|
|
|
|
|
|
|
|
8330 Internal Standard (1,4-dinitrobenzene)To ensure the highest quality explosives standards, Restek chemists carefully purify or synthesize all of the compounds listed in EPA Method 8330. View Product Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
tert-Amyl ethyl ether Standard (TAEE)Oxygenate additive in (US) gasolines. A US EPA target analyte that is not commercially available, this reference material is prepared from a laboratory-synthesized sample. View Product Information |
|
|
|
|
|
|
|
|
|
|
|
|
Ethylene OxideThe test for ethylene oxide is specified in many individual drug monographs of USP24/NF19. The limit test concentration is currently 10 ppm. While the specific test solution and method will vary depending on the particular drug monograph, the solution below is suitable for most tests. If your test requires a different ethylene oxide solution, fill out our Custom Reference Standards Quote Form or e-mail standards@restek.com. View Product Information |
|
|
C50 in Toluene
View Product Information |
Tetrapentyltin Internal Standard
View Product Information |
Tetra-n-propyltin Internal Standard
View Product Information |
Tripentyltin Chloride Surrogate
View Product Information |
Tri-n-propyltin Chloride Surrogate
View Product Information |
Tributyltin Chloride Calibration Mixture
View Product Information |
|
Bank Dye Standard (MAAQ) (1-N-(methylamino)anthraquinone (MAAQ))Restek offers this qualitative standard (red dye used in bank “Security Packs”) to help investigators in municipal police stations and criminal laboratories fight crime. View Product Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stoddard Solvent StandardStoddard solvent is also known as Type I mineral spirits, Texsolve S, or Varsol® 1 mineral spirits. We offer this reference material for those who need to calibrate Stoddard solvent separately. This standard is dissolved in methanol for analysis by either direct injection or purge and trap. View Product Information |
|
|
|
Hydraulic Oil Standard
View Product Information |
Creosote Oil Standard
View Product Information |
|
|
Fuel Oil #6 StandardThis fuel, sometimes called bunker C or residual, is a black viscous oil. Applications in which it may be used require the ability to preheat the fuel prior to pumping and burning. View Product Information |
Fuel Oil #5 StandardFuel oil #5 is typically used in applications in which there is little or no preheating of the fuel prior to burning. A blend of distillate (fuel oil #2) and residual (fuel oil #6), the fuel oil #5 used to prepare this mixture has a kinematic viscosity of 106.5 at 38 °C (100 °F), measured using ASTM D-445. View Product Information |
Fuel Oil #4 StandardFuel oil #4 is typically used in limited applications in which the fuel cannot be preheated prior to burning. The fuel is a blend of distillate (fuel oil #2) and residual (fuel oil #6) to meet ASTM viscosity specifications. The fuel oil #4 used to prepare this mixture has a kinematic viscosity of 21.9 at 38 °C (100 °F), measured using ASTM D-445. View Product Information |
Used Motor Oil Composite StandardPrepared from an equal-volume blend from five gasoline-powered vehicles (belonging to Restek employees). After blending, a precisely weighed amount of the composite is added to a volumetric flask to produce the standard. View Product Information |
Motor Oil Composite StandardPrepared from an equal-volume blend of 5W30, 10W30, 10W40, and 20W50 motor oils. After blending, a precisely weighed amount of the composite is added to a volumetric flask to produce the standard. View Product Information |
|
|
|
|
|
|
|
|
|
|
|
|
L/C VOA Lab Control Sample #2 (vinyl chloride)We prepare the L/C VOA Lab Control Sample in two parts. Sample #1 contains all compounds except vinyl chloride, because this compound is extremely volatile and must be replaced frequently. Sample #2 contains vinyl chloride. View Product Information |
|
8330 Surrogate (1,2-dinitrobenzene)To ensure the highest quality explosives standards, Restek chemists carefully purify or synthesize all of the compounds listed in EPA Method 8330. View Product Information |
8330 Internal Standard (3,4-dinitrotoluene)To ensure the highest quality explosives standards, Restek chemists carefully purify or synthesize all of the compounds listed in EPA Method 8330. View Product Information |
|
|
|
|
|
ChloropreneA pure, quantitative chloroprene solution, specially stabilized in purge-and-trap grade methanol to allow dilutions for working standards in unmodified P&T methanol. The entire preparation procedure is performed under carefully monitored conditions to prevent any contamination or polymerization of the highly reactive, neat chloroprene. View Product Information |
Single-Component Explosives Solutions
View Product Information |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Antifoam Agent for Purge-and-Trap Samples
View Product Information |
|
|
|
Dimethyldichlorosilane (DMDCS) Deactivating Agent
View Product Information |
|
|
|
|