Gas Purification
Accessories

Products

Hydrocarbon S-Trap

  • Removes hydrocarbons and other contaminants.
  • Reduces organics to 0.1 ppm (assuming 100 ppm input).
  • Each individually activated to ensure maximum efficiency.
  • Fits in GC oven for easy thermal recharging.
  • Maximum operating pressure: 60 psi (414 kPa).

View Product Information

Thermal Gas High Capacity Purifier Replacement Getter Tube

Each replacement getter tube has 12 L oxygen and 35 L water vapor capacity at a minimum flow rate of 1 liter/minute and removes oxygen, water, carbon monoxide, carbon dioxide, hydrocarbons (except methane) to ppb levels; pure enough for MS. Typically requires replacement once per year.

View Product Information

Restek Filter Base Plates

  • Standard base plate fittings are 1/8″. To adapt to 1/4″, order 1/8″ to 1/4″ tube-end unions.
  • End fittings available in brass or stainless steel.
  • Base plates fit all stand alone Super-Clean gas filters offered.

    Each base plate unit measures:
    4″ x 4″ x 1 7/8″ (10.2 x 10.2 x 4.8 cm)

View Product Information

Gas Pressure Gauge Kit

  • Use an in-line pressure gauge to indicate when a thermal gas purifier getter tube should be replaced.
  • Includes 1/8″ tee and 0–100 psi (0-689k Pa) gauge.

View Product Information

Click-On Inline Super-Clean Connectors

Click-On connectors allow you to change traps quickly, without introducing oxygen into your system.

View Product Information

Click-On Inline Super-Clean Double Connector

Connects any Click-On trap to a Click-On indicator.

View Product Information

Accessories

for Inline Super-Clean Gas Traps and Connectors

Replacement O-Rings for Cartridge Base Plates

Pack includes 10 large O-rings and 10 small O-rings.

View Product Information

1/8-Inch to 1/4-Inch Tube-End Unions

To adapt 1/8″ Super-Clean base plate fittings to 1/4″, use 1/8″ to 1/4″ tube-end unions.

View Product Information

Wall Mounting Bracket

Base plates can be mounted by using screws and the mounting holes on the base plate, or by using this optional wall mounting bracket.

View Product Information