Vials

Save time and reduce waste—these eco-friendly vials replace syringe filtration and eliminate the need for separate vials, caps, syringes, and filters. Remove contaminants and particulates from your HPLC samples with a just a single squeeze!

Interlock limited volume vials offer the performance and convenience of a one piece microvial for a fraction of the cost. A 300 µL insert is fused into a 12 x 32 mm clear or amber glass vial. This one piece design reduces the potential for contamination.

Caps sold separately: Magnetic Screw Thread Caps

• Certificates enclosed with each kit.
• Vials of clear or amber borosilicate glass, with ID marking spots.
• Closures with pre-inserted septa.
• Each kit sealed for integrity.

• Increased neck length for accommodating fluctuations in robotic arm settings.
• Eliminate cracked necks, breakage, and dangerous sharp edges, using soft Versa Vial PTFE/silicone plugs.
• Largest target area available, ideal for sampling and pipette use.
• Vials available with or without graduated marking spots.
• Patent pending.
  
  Click here for inserts and plugs.

• Container, liner, and closure cleaned and assembled.
• Clear or amber.
• Open top caps.
• PTFE faced 0.125″ silicone septa.
• Each case lot numbered.

• Two sizes available.
• Tapered for high recovery of contents.
• Work with Mininert® sampling valves.

• Plastic vial.
• Choice of glass or polypropylene insert.

Vials packaged in a clear-lid tray. Caps with septa packaged in a plastic bag.

For an instrument reference chart for 2.0 mL, 11 mm Crimp-Top Vials, click here.

For an instrument reference chart for 4.0 mL WISP 48 Style Vials, click here.

For an instrument reference chart for 4.0 mL WISP 48 Style Vials, click here.

Caps attached to vials.

For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vials, click here.

• 40% larger opening than other vials.
• Step profile automatically centers glass flange limited volume inserts.
• Preassembled caps with septa, with or without vials.
• Designed for Waters Alliance® autosamplers.
  
  For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vials, click here.

• Plastic vials.
• Choice of glass or polypropylene insert.

• Vials packaged in a clear-lid tray. Preassembled caps with septa packaged separately in a plastic bag.
• Black polypropylene open-hole caps and 8 mm red PTFE/silicone septa, 0.065″.
  
  For an instrument reference chart for 2.0 mL, 8 mm Screw-Thread Vials, click here.

Caps attached to vials.

For an instrument reference chart for 2.0 mL, 8 mm Screw-Thread Vials, click here.

• Fit all 2.0 mL, 12 x 32 mm, screw-thread 8 mm/425 vial-based autosamplers.
• Vaporization is minimized over shorter vials.
  
  For an instrument reference chart for 2.0 mL, 8 mm Screw-Thread Vials, click here.

For an instrument reference chart, click here.

White graduated marking spots are a standard feature unless otherwise noted.

For an instrument reference chart for 2.0 mL, 11 mm Crimp-Top Vials, click here.

• Easy to use; comfortable grip.
• Hundreds of operations from one charge.
• Adjustable crimping force.
• New battery allows for faster charge cycle.
• All kits include a universal plug set for the battery charger.
• For 11 mm and 20 mm caps.
• One-year warranty.

Our new Easy Grip Crimpers and Decappers feature tough, light glass-filled plastic bodies with curved handles, which improve hand comfort during use. The bottom-pull handle allows for a steadier hold than top-push handles. An easily viewed adjustment knob is located at the head of the product. The clearly shown + and - symbols, along with directional arrows, simplify adjusting the intensity of the crimp/decap needed. The knob is also designed to indicate when the crimp setting has been reached, when it fully contacts the body of the product.

• Fit all 2.0 mL, 12 x 32 mm, crimp-top vial based autosamplers.
• Shorter screw cap allows the robotic autosampler to function properly.
• Wider opening prevents syringe problems.
• Dimensions are effectively identical to the crimp-top vial.

• Fit all 2.0 mL, 12 x 32 mm, crimp-top vial based autosamplers.
• Shorter screw cap allows the robotic autosampler to function properly.
• Wider opening prevents syringe problems.
• Dimensions are effectively identical to the crimp-top vial.
  
  For an instrument reference chart for 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials, click here.

• Fit all 2.0 mL, 12 x 32 mm, screw-thread 8 mm/425 vial-based autosamplers.
• Vaporization is minimized over shorter vials.

• Fit all 2.0 mL, 12 x 32 mm, screw-thread 8 mm/425 vial-based autosamplers.
• Vaporization is minimized over shorter vials.

• Snaps on any crimp-style vial.
• Clear polypropylene cap provides a tighter seal than standard Snap Ring Cap.
• Good for pressurized injection systems.
• Save money! Use this snap cap when you don’t need to crimp.

• Works on any crimp style vial.
• Crimps smoothly and easily—no more sharp edges from an aluminum crimp cap.
• Easily decaps using standard decapping tools.
• Eliminates inconsistent sealing that results from improper crimping.
• Unique design holds the septum firmly in place.
• Provides better seal than snap caps.*
• Meets CONEG standards. The Poly Crimp Seal is free of heavy metals and is easily disposed of or incinerated.

• Racks feature alphanumeric indexing for easier vial identification.
• Racks can be stacked for efficient storage.
• Fits most 2.0 mL, 12 x 32 mm vials (vials sold separately).

Mininert® valves are very convenient for repetitive sampling and limit content exposure to the silicon septum. Models are available for screw-cap and crimp-top vials. The crimp-top valve for 20 mm ID glassware slides into the neck of the vial. Turn the threaded flange to secure a tight fit.