delim
delim
delim
Vials & Well Plates

Vials & Well Plates

Products

2.0 mL, 11 mm Crimp Vial Convenience Kits (Vials, Caps, & Septa)

Vials packaged in a clear-lid tray. Caps with septa packaged in a plastic bag.

View Product Information

2.0 mL, 9 mm Screw-Thread Vial Convenience Kits (Vials, Caps, & Septa)

Vials packaged in a clear-lid tray. Caps with septa packaged in a plastic bag.

View Product Information

2.0 mL, 8 mm Autosampler Vial Convenience Kits

Vials packaged in a clear-lid tray. Preassembled caps with septa packaged separately in a plastic bag.

View Product Information

Thomson SINGLE StEP Standard Filter Vials

  • Recommended for samples containing less than 10% solid particulates.
  • Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers.
  • Minimize sample loss by eliminating multiple transfers.
  • Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon.
  • Pre-slit PTFE/silicone caps help eliminate broken autosampler needles and cored septa.
  • Rugged polypropylene vial houses insert with 450 μL loading capacity and low dead volume (120 μL).
  • Fit most standard 12 x 32 mm autosamplers, including UHPLC instruments.

View Product Information

Interlock Vials

Interlock limited volume vials offer the performance and convenience of a one-piece microvial for a fraction of the cost. A 300 µL insert is fused into a 12 x 32 mm clear or amber glass vial. This one-piece design reduces the potential for contamination.

View Product Information

Certified Autosampler Vial Kits

Certified 2.0 mL Screw-Thread Vials

  • Certificates enclosed with each kit.
  • Vials of clear or amber borosilicate glass with ID marking spots.
  • Closures with pre-inserted septa.
  • Each kit sealed for integrity.

View Product Information

2.0 mL Versa Vials, Glass, 12 x 32 mm

  • Elongated neck allows for consistent, reliable autosampler pick up.
  • 9 mm opening is ideal for sampling and pipette use.

View Product Information

Precleaned Volatile Organic Analyte (VOA) Sampling Vials

  • Container, liner, and closure cleaned, assembled, and lot traceable.
  • Open-top caps.
  • PTFE faced 0.125" silicone septa.
  • Cleaned to U.S. EPA Protocol B specifications.

View Product Information

Micro-Vials with Screw Threads

  • Two sizes available.
  • Tapered for high recovery of contents.
  • Work with Mininert sampling valves.

View Product Information

2.0 mL, 11 mm Crimp-Top Vial With 100 µL Insert

  • Plastic vial.
  • Choice of glass or polypropylene fused insert.

View Product Information

2.0 mL Big Mouth Step Screw-Thread Vials (vial only)

  • 40% larger opening than other vials.
  • Step profile automatically centers glass flange limited volume inserts.
  • Preassembled caps with septa, with or without vials.
  • Designed for Waters Alliance autosamplers.

View Product Information

2.0 mL, 8 mm Screw-Thread Vials with 100 µL Insert

  • Plastic vials.
  • Choice of glass or fused polypropylene insert.

View Product Information

2.0 mL Preassembled Vial Kits

8 mm/425 Screw-Thread, Unmarked Vials, Septa, and Caps

Caps attached to vials.

View Product Information

2.0 mL, 8 mm Screw-Thread Vials (vial only)

Fit all 2.0 mL, 12 x 32 mm, screw-thread 8 mm/425 vial-based autosamplers.

View Product Information

2.0 mL, 11 mm Crimp-Top Vials, 12 x 32 mm

Choose with or without graduated marking spots.

View Product Information

High-Power Electronic Crimping Tool

  • No batteries to change—fixed power supply provides steady, reliable power. Available with cords for China, Europe, Japan, Taiwan, United Kingdom, and United States.
  • Interchangeable jaw sets allow you to buy only the size crimper or decapper you need (11 mm or 20 mm).
  • Save time and minimize adjustments by storing separate programs for different caps and seals.
  • Strong enough for use with all steel and magnetic caps.
  • Combine with optional base and mounting kit for hands-free operation.

View Product Information

Well Plates

  • Polypropylene plates with round-bottom wells reduce liquid retention; conical bottom provides optimal recovery of reagents.
  • Nunc shared wall technology allows increased well volume for optimum storage capacity and improved mixing.
  • Round well shape is ideal for applications that require vortexing.
  • Ideal for sample collection, storage, sampling, and combinatorial chemistry and library applications.
  • Fits most autosampler compartments.
  • All microplates manufactured by Nunc meet the recommendation of American National Standards Institute (ANSI) (ANSI/SBS 1-2004).

View Product Information

Electronic Rechargeable Crimpers and Decappers

  • Easy to use; comfortable grip.
  • Hundreds of operations from one charge.
  • Adjustable crimping force.
  • Large battery allows for faster charge cycle.
  • All kits include a universal plug set for the battery charger.
  • For 11 mm and 20 mm caps.
  • One-year warranty.

View Product Information

Easy Grip Manual Crimpers and Decappers

Our Easy Grip crimpers and decappers feature tough, light, plastic bodies with curved handles that improve hand comfort during use. The bottom-pull handle allows for a steadier hold than top-push handles. An easily viewed adjustment knob is located at the head of the product. The clearly shown + and symbols, along with directional arrows, simplify adjusting the intensity of the crimp/decap as needed. The knob is also designed to indicate when the crimp setting has been reached, when it fully contacts the body of the product.

View Product Information

Inserts

for Versa Vials

2.0 mL, 9 mm Short-Cap, Screw-Thread Vials (vial only)

Fit all 2.0 mL, 12 x 32 mm, crimp-top vial- based autosamplers.

View Product Information

Inserts

for 2.0 mL, 11 mm Crimp-Top & 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials

Limited Volume Inserts

for Shell Vials, 1.0 mL WISP 96 Style, 8 x 40 mm

Aluminum Seals w/Septa

for 4.0 mL WISP Crimp-Top Vials

Inserts

for 2.0 mL, 10 mm Big Mouth Step Design Screw-Thread Vials

Inserts

for 2.0 mL, 8 mm Screw-Thread Vials

Caps

for 2.0 mL, 8 mm Screw-Thread Vials

Fit all 2.0 mL, 12 x 32 mm, screw-thread 8 mm/425 vial-based autosamplers.

View Product Information

2.0 mL, 8 mm Caps and Septa (preassembled)

Fit all 2.0 mL, 12 x 32 mm, screw-thread 8 mm/425 vial-based autosamplers.

View Product Information

2.0 mL, 11 mm GC Snap Ring Cap With Septum

  • Snaps on any crimp-style vial.
  • Save money! Use this snap cap when you don’t need to crimp.

View Product Information

2.0 mL, 11 mm Poly Crimp Seal Caps: Snap-On or Crimp

The Poly Crimp seal is versatile, working as either a snap-on or crimp-top cap. Simply use a standard crimping tool to secure the Poly Crimp seal onto any crimp-top vial. It’s that easy!

View Product Information

SPME MicroCenter Caps and Septa

  • Micro-thin septum center pierces easily without bending needles or breaking SPME fibers.
  • Thicker outer septum wall secures septum in place and ensures a tight seal.
  • Versatile closures are suitable for SPME as well as dynamic and static headspace applications.
  • Septa are manufactured from low-extractability silicone and molded for dimensional conformity.
  • Available in magnetic 18 mm screw caps and 20 mm crimp caps.

View Product Information

Crimping Tool Stand

Convenient stand for GC vial crimpers/decappers keeps your bench tidy and your equipment close at hand.

View Product Information

Interchangeable Jaws for High-Power Crimping Tools

The separate crimper and decapper jaw sets fit standard lab vial seals that are aluminum or two-part aluminum/steel caps.

View Product Information

Vial Rack for Headspace Vials

  • Securely holds up to 36 headspace vials (fits 6, 10, or 20 mL vials).
  • Vials lock in rack for convenient one-handed cap removal.
  • Openings in the bottom of each well facilitate drainage.
  • Alphanumeric indexing on rack simplifies sample identification.
  • Easy to clean and fully autoclavable.*
  • Stackableeven with vials in place.

View Product Information

Universal Sealing Mats

  • Protect contents and prevent carryover with pre-slit cap mats.
  • Chemically resistant, silicone mats are excellent for compound storage to -80 °C.
  • Pre-slit mats pierceable by autosampler needle, pipette tip, or probe.
  • Universal mat for sealing 0.45, 1.3, and 2.0 mL plates.

View Product Information

Replacement Septa (PTFE-Lined Silicone)

for VOA Sampling Vials, 60 mL Sample Collection Vials, and 250 mL Sample Collection Bottles

2.0 mL Sample Vial Racks

  • Racks feature alphanumeric indexing for easier vial identification.
  • Racks can be stacked for efficient storage.
  • Fits most 2.0 mL, 12 x 32 mm vials (vials sold separately).

View Product Information

Mininert Precision Sampling Valves for Vials

Mininert valves are very convenient for repetitive sampling and limit content exposure to the silicon septum. Models are available for screw-cap and crimp-top vials. The crimp-top valve for 20 mm ID glassware slides into the neck of the vial. Turn the threaded flange to secure a tight fit.

View Product Information