Rt-Msieve 5A PLOT Column, 30 m, 0.53 mm ID, 50 µm
Rt-Msieve 5A PLOT Column, 30 m, 0.53 mm ID, 50 µm
Overview
- Improve accuracy with sharp, symmetrical peaks for argon, oxygen, and carbon monoxide.
- Easily separate permanent gases at temperatures above ambient.
- Restek PLOT technology reduces particle release, improving flow reproducibility and reducing downtime for maintenance.
- Temperature range: -100 to 300 °C.
A GC column phase cross-reference is also available.
Model your PLOT column using our Pro EZGC Chromatogram Modeler.
Restek’s molecular sieve 5A PLOT columns are designed for efficient separation of argon/oxygen and other permanent gases, including carbon monoxide. Special coating and deactivation procedures ensure chromatographic efficiency and the integrity of the porous layer coating. Molecular sieves have very high retention, allowing separations of permanent gases at temperatures above ambient. Our deactivation technology also allows carbon monoxide to elute as a sharp peak. Additionally, our unique immobilization process guarantees that the uniform particles remain adhered to the tubing—even after continuous valve cycling.
Because molecular sieve materials are very hydrophilic, they will adsorb water from the sample or carrier gas. Water contamination can have a detrimental effect on peak symmetry and can reduce the resolution of all compounds. If water contamination occurs, reactivate your Restek Msieve 5A PLOT column by conditioning at 300 °C with dry carrier gas flow for 3 hours.
We do not recommend recoiling PLOT columns as this may cause particles to dislodge from the side of the tubing.