<
Air Monitoring & Gas Sampling <
Passive Sampling Equipment
Passive Air Sampling Kits
- Provide accurate integrated sampling without a sampling pump.
- Siltek® treated components ensure a very inert surface.
- Excellent for sampling times from 0.5 hour to 125 hours.
Restek’s passive air sampling kit incorporates all the hardware necessary to collect air samples, and is easy to assemble for field sampling.* The improved filter design greatly reduces the number of potential leak sites.
The passive air sampling kit is available in seven sampling flow ranges, and in stainless steel or Siltek® treated finish. The stainless steel kit is ideal to partner with the Restek TO-Can® air sampling canister for TO-14A and TO-15 methods. Use the Siltek® treated version with the Restek SilcoCan® air sampling canister when collecting low-level volatile sulfur compounds, or other active compounds.
1. Veriflo® SC423XL flow controller--
This flow controller is the heart of the sampling train. It is a high-quality device designed to maintain a constant mass flow as the pressure changes from -30" Hg to 7" Hg (we recommend you stop sampling at or before 7" Hg of vacuum). All wetted parts of the flow controller can be Siltek® treated.
2. Stainless steel vacuum gauge--
Fitted to the flow controller, the gauge monitors canister vacuum change during sampling.
3. 1/4-inch Siltek® sample inlet--
The 0.3m x 1/4-inch tubing includes a stainless steel nut on the inlet end, to prevent water droplets from accumulating at the edge of the tubing, where they could be pulled into the sampling train.
4. 2-micron frit filter and washer--
Located prior to the critical orifice to prevent airborne particles from clogging the critical orifice. Replaceable. Available in stainless steel, or Siltek® treated for optimum inertness.
5. Interchangeable critical orifice--
An interchangeable ruby critical orifice allows you to control the flow with very high precision.
Note: All fitting connections are 1/4" tube, except where noted.
Superior Performance--an Excellent Restek Value.
Instruction Sheets:
*Air sampling canisters sold separately.
Note: If attaching any of Restek's passive sampling kits to a 3L canister, use a Siltek treated (cat.# 563646) or stainless steel (cat.# 563647) connector between the two components.
