See sample photos of individual liners below ordering table.
Use the Drilled Uniliner® liner with the hole near the bottom for semivolatile analysis or when compounds of interest could be affected by a tailing solvent peak. Use the Drilled Uniliner® liner with the hole near the top for chlorinated pesticides analysis, aqueous injections, as well as for analysis in which the compounds of interest elute away from the solvent peak.
*Nominal ID at syringe needle expulsion point. **Hole in Drilled Uniliner liner makes direct injection possible with EPC-equipped Agilent 6890 & 7890 GCs!
Note: liners are shown with column end at lower left. Click thumbnails to see enlarged view.
21054 Drilled Uniliner®, Hole near Top, 4.0mm x 6.3 x 78.5 for Agilent GCs IP Deact., ea
21054-214.1 Drilled Uniliner®, Hole near Top, 4.0mm x 6.3 x 78.5 for Agilent GCs Siltek® Deact., ea
20756 Drilled Uniliner® Liner w/Hole near Bottom 4mm x 6.3 x 78.5 for Agilent GCs IP Deact., ea
20771 Drilled Uniliner® Liner w/Hole near Bottom 4mm x 6.3 x 78.5 for Agilent GCs IP Deact., 5pk
20508 Double Gooseneck Drilled Uniliner®, 4mm x 6.3x78.5 for Agilent GCs IP Deact., ea
20954 Drilled Uniliner® Liner Double Gooseneck, Hole near Bottom 4mm x 6.3 x 78.5 for Agilent GCs IP Deact., ea
21390-214.1 Drilled Uniliner® Liner Hole near Top, 1mm x 6.3 x 78.5 for Agilent GCs, Siltek® Deact., ea
22979 Drilled Cyclo-Uniliner®, Hole near Top, 4.0mm x 6.3 x 78.5 for Agilent GCs, IP Deact., ea
21052 Uniliner® Liner 1mm x 6.3 x 78.5 for Agilent GCs IP Deact., ea
21052-214.1 Uniliner® Liner 1mm x 6.3 x 78.5 for Agilent GCs Siltek® Deact., ea
22268 Uniliner® Liner 4.0mm x 6.3 x 78.5mm for Agilent GCs IP Deact., ea.
22270 Cyclo-Uniliner® Liner 4.0mm x 6.3 x 78.5mm for Agilent GCs IP Deact., ea.
22272 Open-top Uniliner® Liner 4.0mm x 6.3 x 78.5mm for Agilent GCs IP Deact. w/Deact. Wool, ea.
We accept Visa, MasterCard and American Express
Buy from an Authorized Restek Distributor to ensure top product quality, full warranty protection, and reliable technical support.