<
Supplies for PerkinElmer GCs <
Inlet Liners for PerkinElmer GCs
DI Liners for PerkinElmer GCs: Drilled Uniliners®
See sample photos of individual liners below ordering table.
Use the Drilled Uniliner
® liner with the hole near the bottom for semivolatile analysis or when compounds of interest could be affected by a tailing solvent peak. Use the Drilled Uniliner
® liner with the hole near the top for chlorinated pesticides analysis, aqueous injections, as well as for analysis in which the compounds of interest elute away from the solvent peak.
*Nominal ID at syringe needle expulsion point.
Note: liners are shown with column end at lower left.
Click thumbnails to see enlarged view.
20819 Drilled Uniliner® Liner w/hole near top 4mm x 6.2 x 92.1 for PE GCs IP Deact., ea
|
21293 Drilled Uniliner® Liner Hole near Bottom, 4mm x 6.2 x 92.1 for PE GCs, IP Deact., ea
|
21295 Gooseneck Drilled Uniliner® Liner, Hole near Top, 4mm x 6.2 x 92.1 for PE GCs IP Deact., ea
|
21297 Gooseneck Drilled Uniliner® Liner, Hole near Bottom, 4mm x 6.2 x 92.1 for PE GCs IP Deact., ea
|
|