<
Air Monitoring & Gas Sampling
<
Canisters
Parker Balston® Model FID-1000 and FID-2500 Gas Stations
Built to International Standards
Produced and supported by an ISO 9001 registered organization, Parker Balston® hydrogen generators are built to meet the toughest laboratory standards--CSA, UL, CE, and IEC 1010.
- Single unit produces UHP zero air from house compressed air and 99.9995% pure hydrogen from deionized water.
- Ideal for supplying up to 5-6 FIDs.
- Eliminates inconvenient and dangerous gas cylinders.
- Silent operation, minimal operator attention required.
Parker Balston® Gas Stations provide both UHP grade hydrogen gas and zero grade air for flame ionization detectors. The system is specifically designed to supply gas to FIDs and to support flame thermionic and flame photometric detectors. The units produce zero air by purifying compressed air to a total hydrocarbon concentration of 0.1ppm or less (measured as methane).
The hydrogen generators produce hydrogen gas from deionized water, using the principle of electrolytic dissociation of water and hydrogen proton conduction through a proton exchange membrane cell.
Specifications - FID Gas Stations:
Hydrogen Purity: 99.9995%
Zero Air Purity: FID-1000:
< 0.1ppm total hydrocarbons as methane
FID-2500:
< 0.05ppm total hydrocarbons as methane
Max. Hydrogen Flow Rate: FID-1000: 90cc/min.
FID-2500: 250cc/min.
Max. Zero Air Flow Rate: FID-1000: 1000cc/min.
FID-2500: 2500cc/min.
Power: 120VAC/amp, 60Hz, 400 watts
Hydrogen Outlet Pressure: 60 psig (414kPa)
Zero Air Outlet Pressure: 40-125 psig* (276-862kPa)
Inlet Connection: 1/4" NPT (female)
Outlet: 1/8" compression
Dimensions: 16.5"h x 10.5"w x 17"d
(42cm x 27cm x 43cm)
Weight: 53 lbs. (24kg)
Instruction Sheets:
International Power Cords available. Just add the proper suffix to the catalog number for the generator you are ordering, or contact Customer Service.
United Kingdom (230VAC, 50/50Hz), no additional charge: add "-550"
European (230VAC, 50/60Hz), no additional charge: add "-551"
IEC Connector Only (230VAC, 50/60Hz), no additional charge: add "-552"
Japanese (200VAC, 50/60Hz), no additional charge: add "-556"
Japanese for Zero Air (100VAC, 50/60Hz), additional charge: add "-553"
Japanese for Hydrogen (100VAC, 50/60Hz), additional charge: add "-554"
Japanese for Nitrogen (100VAC, 50/60Hz), additional charge: add "-555"
*Zero air inlet requires minimum of 40psig (276kPa) compressed air pressure.
