<
Supplies for Thermo Scientific GCs <
GC/MS Supplies for Thermo Scientific GCs
EZ No-Vent™ GC Column-MS Connector for Thermo Scientific Focus DSQ GC/MS
Change columns in minutes--without venting!
- Change GC/MS columns in minutes without venting--100µm transfer line throttles vacuum and prevents venting.
- Easy to install and maintain--no special tools or plumbing required.
- Gold-plated body for inertness.
- Deactivated transfer line keeps analytes focused; high-temperature polyimide ferrules eliminate leaks at the problematic transfer line fitting.
- Lower cost than other “no-vent” fittings.
- For Thermo Scientific Focus DSQ GC Mass Spectrometers.
Restek has designed the EZ No-Vent™ GC column-mass spectrometer connector to be simple and easy to use. A critical orifice in the EZ No-Vent™ connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas as is required for other manufacturer's vent systems. The lengthy vent and pump-down cycle is not required, and normal instrument down-time from a column change is dramatically reduced. The EZ No-Vent™ connector easily attaches to the MS source without special tools or extra plumbing.
Instruction Sheets:
Click thumbnails to see enlarged view.
22454
EZ No-Vent™ for Thermo Scientific Focus DSQ GC Series MS
|
21015
EZ No-Vent™ Ferrules, Replacement ferrules 0.4mm ID: Pack of 2
|
21900
Fitting, Stainless Steel, 1/16" Nut Pack of 5
|
21915
Fitting, Stainless Steel, 1/16" Plug Pack of 2
|
20110
Tool, Wrench, 1/4" X 5/16" Open End, 2 Pack
|
22455
Tool, Wrench, 3/8" X 7/16" Open End 2 Pack
|
| |
|
|
