<
Vials & Syringes
<
Autosampler Syringes for Thermo Scientific/CTC/Leap GCs
ShinCarbon ST 80/100 Packed Columns
Analyze oxygen, nitrogen, methane, carbon monoxide, and carbon dioxide with one column and at room temperature. ShinCarbon ST material, a high surface area carbon molecular sieve (~1,500 m²/g), is the ideal medium for separating gases and highly volatile compounds by GSC. The rapid, above-ambient analyses these columns provide will be a great convenience. Excellent thermal stability of the high surface area carbon, combined with careful conditioning during column manufacturing, ensures low-bleed operation and rapid stabilization when installing a new column. Custom-made ShinCarbon ST columns are available on request.
ShinCarbon ST is a highly stable material. Its 330°C upper temperature limit minimizes bleed and baseline rise during temperature programming, making the material compatible with most detection systems used for gas analysis, including TCD or HID. All ShinCarbon ST columns are fully conditioned in an oxygen/moisture free environment to prevent contamination. This minimizes stabilization time (less than 30 minutes) when installing a new column which, in turn, minimizes downtime.
- Separate permanent gases, including CO/CO2, without cryogenic cooling.
- Rapid separations of permanent gas/light hydrocarbon mixtures.
- Excellent compatibility with most GC detectors--minimal bleed, minimal baseline rise.
- Preconditioned, less than 30 minutes to stabilize.
(SilcoSmooth™ Stainless Steel)
Column Configuration Key:
General: General Configuration
Agilent: Agilent 5880, 5890, 5987, 6890, 7890
Varian: Varian 3700, Vista Series, FID
PE/Sigma: PE 900-3920, Sigma 1,2,3
PE Auto Sys: PE Auto System 8300, 8400, 8700, Clarus 500
Other column configurations available. Please see our annual product catalog or contact Technical Service for more information.
NOTE: Initial 2" of column will be empty, to accommodate a needle. For a completely filled column add suffix -901.
Agilent configuration also includes 1 1/2" void on detector side.
