<
GC Columns <
Guard Columns
IP Deactivated Fused Silica Guard/Retention Gap Columns
Use guard columns to:
• Reduce effects of dirty samples on column performance.
• Reduce downtime and maintenance.
- Useful for a wide range of applications.
- Use with most common solvents.
- Maximum temperature: 325°C
Diameters greater than 0.10mm are tested with the Grob test mix, to ensure high inertness.
*Not tested with the Grob test mix because of a large pressure drop.
**30- and 60-meter lengths are banded in 5-meter sections.
†Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.