<
Sample Preparation
<
SPE Disks
Tubing: Treated Electropolished 316L
Our highest performing tubing.
Use for: - demanding/corrosive environments.
- high temperatures.
- high pressures.
- ultimate inertness.
Restek sets the standard in tubing for analytical and process applications. Complete your system with treated fittings and valves for an inert, corrosion-resistant pathway.
The extremely inert Siltek®/Sulfinert® surface is ideal in applications such as sulfurs or automotive exhaust testing, stack gas sampling, process monitoring, or in any other application in which a representative sample must be transferred without loss.
In systems used to transfer hydrochloric acid, nitric acid, or seawater, Silcosteel®-CR treated electropolished stainless steel tubing will last longer and require less maintenance. In tests, Silcosteel®-CR treated stainless steel was very well protected from pitting and crevice corrosion, compared to bare steel. For details, request lit. cat.# 59956.
Price-per-foot by length. Minimum order is 5 ft. Price breaks are available at 25 ft., 100 ft., and 300 ft.
Your correct price will be reflected on your invoice.
An extra charge is applied for cutting Siltek®/Sulfinert® or Silcosteel®-CR tubing. The charge is calculated from the total number of pieces produced for each line item:
# of Pieces Added Charge
5 to 15 $50
16 to 30 $100
31 to 75 $150
76 to 99 $200
100 to 200 $250
1/8" OD: 5 ft. to 95 ft. in one continuous coil; 1/4" OD: 5 ft. to 300 ft. in one continuous coil. Longer lengths will be more than one coil.
Note: required length in meters x 3.2808 = length in feet.
