<
Environmental Reference Standards
<
Method 504.1 (Ethylene Dibromide/Dibromochloropropane)
Purifier Modules: VICI® mat/sen® Gas-Specific
Dimensions: 21" x 1 1/2" (53.3 x 3.8 cm)
- Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air.
- Reduce gas impurities from ppm to low ppb levels.
- Decrease baseline noise and increase GC/MS sensitivity.
- Prepurged with the specified gas, to shorten downtime.
Performance for these purifiers is optimized by incorporating a multiple-bed format that progressively lowers concentrations of contaminants at each successive bed. VICI® Mat/Sen® purifiers are guaranteed to produce gases that are purer than 99.9999%, when supplied with gas of 99.995% purity, and are prepurged with the specified gas to speed conditioning. Purifier capacity is approximately four tanks of gas at 99.995% (50ppm) purity, and correspondingly longer for purer gases.
Please Note: We recommend using an indicating oxygen trap (e.g., cat.# 22029, pg. ) downstream from a VICI® Mat/Sen® purifier to continually ensure gas purity and indicate absolute change-out time.
Specifications:
Length: 21" (52.3cm)
Diameter: 1.5" (3.8cm)
Maximum Inlet Pressure: 1,000psi (6895kPa)
Maximum Recommended Flow: 500mL/min.
Pressure Drop from 120psi (827kPa) inlet at a flow of 0-500mL/min.: <0.20psi (1.4kPa)
Compression End Fittings: 1/8" or 1/4", stainless steel
Shipping Weight: 3.04 lb. (1,300 g)
*Warning: Do not use with nitrogen containing more than 500ppm of oxygen. If the oxygen level in the stream exceeds 500ppm, use an air purifier.
