Restek
Home / Gas Chromatography / GC Columns / GC PLOT Columns / Rt-QS-BOND PLOT Column, 30 m, 0.53 mm ID, 20 µm
Restek
Rt-QS-BOND PLOT Column, 30 m, 0.53 mm ID, 20 µm
  1. Rt-QS-BOND PLOT Column, 30 m, 0.53 mm ID, 20 µm

Rt-QS-BOND PLOT Column, 30 m, 0.53 mm ID, 20 µm

Catalog No. 19738
US$835.00
Ordering Note

The certificates of analysis (CofAs) for fused silica, MXT, and PLOT analytical GC columns manufactured after December 2024 will be paperless. After that time, these digital CofAs can be accessed at www.restek.com/documentation.

Rt-QS-BOND PLOT Column, 30 m, 0.53 mm ID, 20 µm

Rt-QS-BOND PLOT Column, 30 m, 0.53 mm ID, 20 µm

US$835.00

Overview

Features & Benefits
  • Intermediate polarity porous polymer PLOT column incorporating low 4-vinylpyridine.
  • Separates ethane, ethylene, and acetylene to baseline.
  • Temperature range: -60 to 250 °C.
A GC column phase cross-reference is also available.

Model your PLOT column using our Pro EZGC Chromatogram Modeler.

Description
Porous polymers are unique, highly retentive stationary phases with a wide application range that are able to elute both polar and nonpolar compounds. They are very hydrophobic, so water has no impact on retention times and even elutes as a good chromatographic peak. The Q-BOND is our most nonpolar and widely used porous polymer column; functional groups can be added to increase polarity (i.e., QS-, S-, and U-BOND). The process used to manufacture porous polymer PLOT columns causes the particles to adhere strongly to the walls of the tubing, so there is virtually no particle generation. You get reproducible performance from column to column, including selectivity and flow.

We do not recommend recoiling PLOT columns as this may cause particles to dislodge from the side of the tubing.

Specifications

Product Specifications
Catalog No.
19738
Product Name
Rt-QS-BOND PLOT Column, 30 m, 0.53 mm ID, 20 µm