Restek
Resource Hub / ChromaBLOGraphy / Passive Canister Sampler Part II Assembly and Leak Check

Passive Canister Sampler – Part II: Assembly and Leak Check

15 Jan 2015

The following video is step-by-step tutorial on assembling a Restek Veriflo flow controller and then leak checking the controller:

https://www.youtube.com/watch?v=fTK3PEzb7TE

For information on calibrating Restek flow controllers (following assembly) and collecting a sample with a Restek flow controller, be sure to check our part III of this blog series

*I said 90 inch-pounds for the face nut torque, but it should be 90 foot-pounds.