share:
delim
delim
Polycyclic Aromatic Hydrocarbons by EPA 610 on Rxi-5ms

Polycyclic Aromatic Hydrocarbons by EPA 610 on Rxi-5ms

Peaks
1.2-Fluorophenol
2.Phenol-d6-
3.1,4-Dichlorobenzene-d4
4.Nitrobenzene-d5
5.Naphthalene-d8
6.Naphthalene
7.2-Fluorobiphenyl
8.Acenaphthylene
9.Acenaphthene-d10
10.Acenaphthene
11.Fluorene
12.2,4,6-Tribromophenol
13.Phenanthrene-d10
14.Phenanthrene
Peaks
15.Anthracene
16.Fluoranthene
17.Pyrene
18.p-Terphenyl-d14
19.Benz[a]anthracene
20.Chrysene-d12
21.Chrysene
22.Benzo[b]fluoranthene
23.Benzo[k]fluoranthene
24.Benzo[a]pyrene
25.Perylene-d12
26.Indeno[1,2,3-cd]pyrene
27.Dibenz[a,h]anthracene
28.Benzo[ghi]perylene
image
GC_EV00825
ColumnRxi-5ms, 30 m, 0.25 mm ID, 0.25 µm (cat.# 13423)
SampleSV Calibration Mix #5 / 610 PAH Mix (cat.# 31011)
Acid Surrogate Mix (4/89 SOW) (cat.# 31025)
B/N Surrogate Mix (4/89 SOW) (cat.# 31024)
SV Internal Standard Mix (cat.# 31206)
Conc.: 10 ng/µL each analyte, 40 ng/μL internal standards
Injection
Inj. Vol.:1.0 µL splitless (hold 0.1 min)
Liner:Drilled Uniliner (hole near bottom) (cat.# 20771)
Inj. Temp.:275 °C
Oven
Oven Temp.:75 °C (hold 0.5 min) to 245 °C at 25 °C/min to 330 °C at 4 °C/min (hold 1 min)
Carrier GasHe, constant flow
Flow Rate:1.2 mL/min
DetectorMS
Mode:Scan
Transfer Line Temp.:280 °C
Solvent Delay Time:2 min
Tune Type:DFTPP
Ionization Mode:EI
Scan Range:35-550 amu
InstrumentHP6890 GC & 5973 MSD
Download PDF

RELATED CHROMATOGRAM LIBRARY SEARCHES

PAH

,

610

,

polycyclic aromatic hydrocarbons

,

polynuclear aromatic hydrocarbons

Printing tips! To print chromatograms full page, change the print settings in the print dialogue window of your PDF reader software: 1) "fit" or "fit to page", 2) "landscape" for wide chromatograms or "portrait" for tall chromatograms.


Restek Domestic Customer Service

Subject

Message

Your Full Name

Your Email

Company Name

Address

Spam Block (Please leave this blank)

all fields required

Thank you

Your message has been sent. We will be in touch shortly.

Message not sent

Sorry, your message could not be sent at this time. Please try again later, or contact Restek or your local Restek representative via phone.

www.restek.com/Contact-Us