share:
delim
delim
NJ DEP EPH Aromatics on Rxi-5Sil MS

NJ DEP EPH Aromatics on Rxi-5Sil MS

PeakstR (min)Conc.
(µg/mL)
1.1,2,3-Trimethylbenzene3.8112.5
2.Naphthalene5.1812.5
3.2-Methylnaphthalene6.0012.5
4.2-Fluorobiphenyl (SS)6.4820.0
5.Acenaphthylene7.0312.5
6.2-Bromonaphthalene (SS)7.2020.0
7.Acenaphthene7.2412.5
8.Fluorene7.8512.5
9.Phenanthrene8.9712.5
10.Anthracene9.0312.5
11.o-Terphenyl (SS)9.4620.0
12.Fluoranthene10.3612.5
13.Pyrene10.6212.5
14.Benz[a]anthracene12.1312.5
15.Chrysene12.1812.5
16.Benzo[b]fluoranthene13.9012.5
17.Benzo[k]fluoranthene13.9512.5
18.Benzo[a]pyrene14.4812.5
19.Indeno[1,2,3-cd]pyrene16.7212.5
20.Dibenz[a,h]anthracene16.8212.5
21.Benzo[ghi]perylene17.2312.5
image
GC_EV1483
ColumnRxi-5Sil MS, 30 m, 0.32 mm ID, 0.25 µm (cat.# 13624)
SampleNJ DEP EPH 10/08 rev. 2 aromatics calibration standard (cat.# 30541)
MA fractionation surrogate spike mix (cat.# 31480)
o-Terphenyl (cat.# 31097)
Diluent:Methylene chloride
Injection
Inj. Vol.:1 µL splitless (hold 1.5 min)
Liner:Topaz 4 mm ID single taper inlet liner w/ wool (cat.# 23303)
Inj. Temp.:300 °C
Purge Flow:50 mL/min
Oven
Oven Temp.:55 °C (hold 1.5 min) to 250 °C at 20 °C/min to 330 °C at 6 °C/min (hold 2.0 min)
Carrier GasHe, constant flow
Flow Rate:5 mL/min
DetectorFID @ 340 °C
Make-up Gas Flow Rate:45 mL/min
Make-up Gas Type:H2
Hydrogen flow:40 mL/min
Air flow:450 mL/min
Data Rate:50 Hz
InstrumentAgilent 7890A GC
Download PDF

Printing tips! To print chromatograms full page, change the print settings in the print dialogue window of your PDF reader software: 1) "fit" or "fit to page", 2) "landscape" for wide chromatograms or "portrait" for tall chromatograms.