share:
delim
delim
Batch-to-Batch Reproducibility of Rxi-5Sil MS

Batch-to-Batch Reproducibility of Rxi-5Sil MS

Peaks
1.2-Ethylhexanoic acid
2.1,6-Hexanediol
3.4-Chlorophenol
4.n-Tridecane
5.1-Methylnaphthalene
6.1-Undecanol
7.n-Tetradecane
8.Dicyclohexylamine
image
GC_GN0050
ColumnRxi-5Sil MS, 30 m, 0.25 mm ID, 0.25 µm (cat.# 13623)
SampleRxi-5Sil MS/XLB Column Test Mix (cat.# 35226)
Diluent:Methylene chloride
Conc.:350 µg/mL
Injection
Inj. Vol.:1.0 µL split
Liner:4mm Gooseneck Precision Liner w/ Wool (cat.# 22983)
Inj. Temp.:250 °C
Split Vent Flow Rate:60 mL/min
Oven
Oven Temp.:125 °C
Carrier GasH2, constant pressure (8.7 psi, 60.0 kPa)
Linear Velocity:37 cm/sec @ 125 °C
Dead Time:1.38 min @ 125 °C
DetectorFID @ 320 °C
Make-up Gas Flow Rate:40 mL/min
Make-up Gas Type:N2
Data Rate:5 Hz
InstrumentHP5890 GC
Download PDF

RELATED CHROMATOGRAM LIBRARY SEARCHES

Reproducibility

,

Rxi-5silMS

,

Rxi

Printing tips! To print chromatograms full page, change the print settings in the print dialogue window of your PDF reader software: 1) "fit" or "fit to page", 2) "landscape" for wide chromatograms or "portrait" for tall chromatograms.


Restek Domestic Customer Service

Subject

Message

Your Full Name

Your Email

Company Name

Address

Spam Block (Please leave this blank)

all fields required

Thank you

Your message has been sent. We will be in touch shortly.

Message not sent

Sorry, your message could not be sent at this time. Please try again later, or contact Restek or your local Restek representative via phone.

www.restek.com/Contact-Us