share:
delim
delim
Tallow FAMEs in Biodiesel Oils on Stabilwax

Tallow FAMEs in Biodiesel Oils on Stabilwax

Peaks
1.Myristic acid methyl esterC14:0
2.Palmitic acid methyl esterC16:0
3.Palmitoleic acid methyl esterC16:1
4.Stearic acid methyl esterC18:0
5.Oleic acid methyl esterC18:1
Peaks
6.Linoleic acid methyl esterC18:2
7.Linolenic acid methyl esterC18:3
8.Arachidic acid methyl esterC20:0
9.Gadoleic acid methyl esterC20:1
10.Lignoceric acid methyl esterC24:0
11.Methyl nervonateC24:1
IS Methyl heptadecanoate
image
GC_PC00916
ColumnStabilwax, 30 m, 0.32 mm ID, 0.25 µm (cat.# 10624)
SampleTallow source of biodiesel (B100), prepared according to European Method EN 14103
Injection
Inj. Vol.:1.0 µL split (split ratio 100:1)
Liner:Cyclosplitter (cat.# 20706)
Inj. Temp.:250 °C
Oven
Oven Temp.:210 °C (hold 5 min) to 230 °C at 20 °C/min (hold 5 min)
Carrier GasH2, constant flow
Flow Rate:3 mL/min
Linear Velocity:60 cm/sec
DetectorFID @ 250 °C
Download PDF

RELATED CHROMATOGRAM LIBRARY SEARCHES

EN 14103

,

biodiesel

,

FAME

Printing tips! To print chromatograms full page, change the print settings in the print dialogue window of your PDF reader software: 1) "fit" or "fit to page", 2) "landscape" for wide chromatograms or "portrait" for tall chromatograms.


Restek Domestic Customer Service

Subject

Message

Your Full Name

Your Email

Company Name

Address

Spam Block (Please leave this blank)

all fields required

Thank you

Your message has been sent. We will be in touch shortly.

Message not sent

Sorry, your message could not be sent at this time. Please try again later, or contact Restek or your local Restek representative via phone.

www.restek.com/Contact-Us