share:
delim
delim
Refinery Gas on Rt-Q-BOND

Refinery Gas on Rt-Q-BOND

PeaksMol%
1.NitrogenBalance
2.Carbon monoxide1.00
3.Methane5.00
4.Carbon dioxide3.00
5.Ethylene2.00
6.Acetylene1.00
7.Ethane4.00
8.Propylene3.00
9.Propane6.00
10.Propadiene1.00
11.Cyclopropane0.04
12.Isobutane5.00
PeaksMol%
13.Isobutene1.00
14.Butene-12.00
15.1,3-Butadiene3.00
16.Butane4.00
17.trans-2-Butene3.00
18.cis-2-Butene2.00
19.Isopentane1.00
20.Pentene-10.40
21.trans-2-Pentene0.40
22.2-Methyl-2-butene0.20
23.Pentane1.00
24.cis-2-Pentene0.15
25.Hexane0.10
image
GC_PC1342
ColumnRt-Q-BOND, 30 m, 0.53 mm ID, 20 µm (cat.# 19742)
SampleRefinery gas standard #2 (cat.# 34442)
Injectionsplit
Liner:Topaz 2.0 mm ID straight inlet liner (cat.# 23313)
Inj. Temp.:200 °C
Oven
Oven Temp.:40 °C to 250 °C at 10 °C/min
Carrier GasHe, constant flow
Flow Rate:4 mL/min
DetectorFID
InstrumentAgilent 7890B GC
NotesThe sample was analyzed using two detectors:
1. FID at 260 °C, 40 µL split injection (split ratio 10:1)
2. TCD at 250°C, 150 µL split injection (split ratio 10:1)

Download PDF

RELATED CHROMATOGRAM LIBRARY SEARCHES

PLOT Columns

,

Plot Q

,

PLOT

Printing tips! To print chromatograms full page, change the print settings in the print dialogue window of your PDF reader software: 1) "fit" or "fit to page", 2) "landscape" for wide chromatograms or "portrait" for tall chromatograms.


Restek Domestic Customer Service

Subject

Message

Your Full Name

Your Email

Company Name

Address

Spam Block (Please leave this blank)

all fields required

Thank you

Your message has been sent. We will be in touch shortly.

Message not sent

Sorry, your message could not be sent at this time. Please try again later, or contact Restek or your local Restek representative via phone.

www.restek.com/Contact-Us