share:
delim
delim
Selectivity of Rt-BOND Porous Polymer PLOT Columns (C1-C2 Hydrocarbons)

Selectivity of Rt-BOND Porous Polymer PLOT Columns (C1-C2 Hydrocarbons)

PeaksConc. Mol%
1.Methane1.0
2.Ethylene1.0
3.Acetylene1.0
4.Ethane1.0
image
GC_PC1360
ColumnSee notes
SampleC1-C2 Hydrocarbons
Diluent:Helium (balance gas)
Injection
Inj. Vol.:50 µL split (split ratio 10:1)
Liner:Topaz 2.0 mm ID straight inlet liner (cat.# 23313)
Inj. Temp.:200 °C
Oven
Oven Temp.:40 °C (hold 3 min) to 100 °C at 20 °C/min
Carrier GasHe, constant flow
Flow Rate:4.5 mL/min
DetectorFID @ 200 °C
InstrumentAgilent 7890B GC
NotesColumns used:
Rt-Q-BOND, 30 m, 0.53 mm ID, 20 µm (cat.# 19742)
Rt-QS-BOND, 30 m, 0.53 mm ID, 20 µm (cat.# 19738)
Rt-S-BOND, 30 m, 0.53 mm ID, 20 µm (cat.# 19746)
Rt-U-BOND, 30 m, 0.53 mm ID, 20 µm (cat.# 19750)
Download PDF

Printing tips! To print chromatograms full page, change the print settings in the print dialogue window of your PDF reader software: 1) "fit" or "fit to page", 2) "landscape" for wide chromatograms or "portrait" for tall chromatograms.


Restek Domestic Customer Service

Subject

Message

Your Full Name

Your Email

Company Name

Address

Spam Block (Please leave this blank)
Drag and Drop Attachments Here (optional)
...


all fields required

Thank you

Your message has been sent. We will be in touch shortly.

Message not sent

Sorry, your message could not be sent at this time. Please try again later, or contact Restek or your local Restek representative via phone.

www.restek.com/Contact-Us