Welcome to the New Restek.com! Take a tour of the new site and feel free to send us your feedback.

Your web browser will no longer be supported by Restek.com as of 30 June 2021.
To avoid any interruption in access or functionality, install a current-generation web browser now. Learn more.

Glycols on Rtx-BAC Plus 1 and 2 Column Set

PeaksRtx-BAC Plus 1 tR (min)Rtx-BAC Plus 2 tR (min)
1.Ethylene glycol1.9832.207
2.Propylene glycol2.3232.433
4.Diethylene glycol4.3804.385
ColumnsRtx-BAC Plus 1 30 m, 0.32 mm ID, 1.8 µm (cat.# 18004)
and Rtx-BAC Plus 2 30 m, 0.32 mm ID, 0.6 µm (cat.# 18006)
using Rxi guard column 5 m, 0.32 mm ID (cat.# 10039)
with universal “Y” Press-Tight connector (cat.# 20405-261)
Diluent:Methanol:water (40:60)
Conc.:200 µg/mL each glycol
Inj. Vol.:1 µL split (split ratio 20:1)
Liner:Premium 4 mm straight inlet liner w/wool (cat.# 23300.1)
Inj. Temp.:260 °C
Oven Temp.:60 °C (hold 0 min) to 240 °C at 20 °C/min (hold 5 min)
Carrier GasHe, constant flow
Linear Velocity:70 cm/sec
DetectorFID @ 240 °C
Make-up Gas Flow Rate:30 mL/min
Make-up Gas Type:N2
InstrumentAgilent/HP6890 GC
NotesThe Rtx-BAC Plus 1 and Plus 2 columns were connected to the injection port using a ~12 inch section of guard column between the injection port and the universal "Y" Press-Tight connector.

Injections were performed manually with a Merlin Microshot injector (cat.# 22229).