Welcome to the New Restek.com! Take a tour of the new site and feel free to send us your feedback.

Your web browser will no longer be supported by Restek.com as of 30 June 2021.
To avoid any interruption in access or functionality, install a current-generation web browser now. Learn more.

Polynuclear Aromatic Hydrocarbons US EPA Method 610 on Rtx-440

ColumnRtx-440, 30 m, 0.25 mm ID, 0.25 µm (cat.# 12923)
Standard/SampleSV Calibration Mix #5 / 610 PAH Mix (cat.# 31011)
Diluent:Methylene chloride
Conc.:20 ppm each compound
Injection
Inj. Vol.:1.0 µL splitless (hold 0.4 min)
Liner:4mm Splitless (cat.# 20772)
Inj. Temp.:320 °C
Oven
Oven Temp.:40 °C (hold 2 min) to 240 °C at 30 °C/min to 320 °C at 8 °C/min (hold 5 min)
Carrier GasH2, constant flow
Flow Rate:3.6 mL/min
DetectorFID @ 320 °C