Welcome to the New Restek.com! Take a tour of the new site and feel free to send us your feedback.

Your web browser will no longer be supported by Restek.com as of 30 June 2021.
To avoid any interruption in access or functionality, install a current-generation web browser now. Learn more.

Increasing Injection Volume while Maintaining Resolution of BDE 49 and 71 on Rtx-1614

ColumnRtx-1614, 15 m, 0.25 mm ID, 0.10 µm (cat.# 10296)
using IP Deactivated Guard Column 5 m, 0.53 mm ID (cat.# 10045)
with Universal Press-Tight Connectors (cat.# 20400)
Inj. Vol.:1, 2, 3, 4, 5, 7.5, 10, and 12.5 µL splitless (hold 1.0 min)
Liner:Gooseneck Splitless (4mm) w/Semivolatiles Wool (cat.# 20799-231.5)
Inj. Temp.:250 °C
Purge Flow:40 mL/min
Oven Temp.:100 °C (hold 1 min) to 140 °C at 40 °C/min to 320 °C at 20 °C/min (hold 4 min)
Carrier GasHe, constant flow
Flow Rate:2 mL/min
Detectorµ-ECD @ 330 °C
Constant Column + Constant Make-up:50 mL/min
Make-up Gas Type:N2
Data Rate:10 Hz
InstrumentAgilent 6890
NotesCarrier gas: Corrected constant flow via pressure ramps.