Welcome to the New Restek.com! Take a tour of the new site and feel free to send us your feedback.
Your web browser will no longer be supported by Restek.com as of 30 June 2021.
To avoid any interruption in access or functionality, install a current-generation web browser now. Learn more.

MXT Capillary Column Coiling Configurations

  • Share:

Restek MXT capillary columns come in the standard configurations given on each product web page. However, they can also be ordered in a variety of other configurations. To order an MXT column in one of the following configurations, use the appropriate suffix from the table below. For example, use catalog number 71811-274 to order an MXT-1 column wound to 2.5" ID/3.0" OD without a cage. When ordering, enter the base catalog number in your cart and then add the suffix under Special Instructions.

Please note that MXT PLOT columns are only available in the standard 7"-diameter, 11-pin cage configuration and the “-273” configuration.

Catalog Number Suffix

MXT Coiling Description

-274

2.5" ID/3.0" OD without cage

-2740

2.5" ID/3.0" OD banded with copper wire

-273

2.75" ID/3.5" OD without cage (fits SRI GCs)

-2730

2.75" ID/3.5" OD banded with copper wire (fits SRI GCs)

-2731

2.75" ID/3.5" OD without cage, 18" leads (fits SRI GCs)

-283

3.5" ID/4.0" OD without cage

-2830

3.5" ID/4.0" OD banded with copper wire

-2831

3.5" ID/4.0" OD with 18" leads

-400

4.0" ID/4.5" OD without cage

-272

4.5" ID/5.0" OD without cage

-2720

4.5" ID/5.0" OD banded with copper wire

-6850M

5.0" ID/5.25" OD banded with copper wire

-271

6" ID/6.5" OD without cage

-2710

6" ID/6.5" OD coil banded with copper wire

-276

6.0" ID/6.25" OD without cage

-2760

6.0" ID/6.25" OD banded with copper wire

-277

7.0" ID/7.25" OD without cage

-2770

7.0" ID/7.25" OD banded with copper wire

-LUC18

MXT column with 0.18 mm ID (fits Lucidity miniGCs)*

-LUC25

MXT column with 0.25 mm ID (fits Lucidity miniGCs)*

-LUC53

MXT column with 0.53 mm ID (fits Lucidity miniGCs)*

*MXT columns for Lucidity miniGCs must be ≤30 m long and come factory connected on a column cartridge (additional cost will be applied).

If you don't see what you need, email Customer Service for a custom coiled column.

GNOT3465A-UNV