Restek
ホーム / ガスクロマトグラフィー / GCカラム / フューズドシリカカラム / Rt-TCEP GC Capillary Column, 30 m, 0.25 mm ID, 0.40 µm
Restek
Rt-TCEP GC Capillary Column, 30 m, 0.25 mm ID, 0.40 µm
  1. Rt-TCEP GC Capillary Column, 30 m, 0.25 mm ID, 0.40 µm

Rt-TCEP GC Capillary Column, 30 m, 0.25 mm ID, 0.40 µm

カタログ番号 10998
ご注文時の注意点

長さ、膜厚はご相談に応じます。テクニカルサービスまたはお近くのRestek代理店にお問合せください。

Rt-TCEP GC Capillary Column, 30 m, 0.25 mm ID, 0.40 µm

Rt-TCEP GC Capillary Column, 30 m, 0.25 mm ID, 0.40 µm

概要

特徴&利点
  • General-purpose columns, ideal for aromatics and oxygenates in gasoline.
  • Temperature range: 0 °C to 150 °C.
製品詳細

Most gasolines contain aliphatic hydrocarbons up to n-dodecane (C12). To improve identification of the aromatics and oxygenates, it is desirable to elute benzene after C11 and toluene after C12. The extremely polar Rt-TCEP stationary phase provides a retention index for benzene greater than 1100 and permits the separation of alcohols and aromatics from the aliphatic constituents in gasoline.

Rt-TCEP columns have the same high polarity as TCEP packed columns (precolumns in ASTM Method D4815 for the analysis of petroleum oxygenates), with the efficiency of a capillary column. The result is a column that can separate a wide variety of compounds with an elution pattern unattainable using other high polarity siloxanes.

The Rt-TCEP column incorporates a nonbonded stationary phase coated on a surface specialized for enhanced polymer stability and extended column lifetime. Solvent rinsing should be avoided. Conditioning is necessary only if the column is to be used at temperatures near the maximum operating temperature.

仕様

製品仕様
カタログ番号
10998
製品名
Rt-TCEP GC Capillary Column, 30 m, 0.25 mm ID, 0.40 µm