Restek
ホーム / ガスクロマトグラフィー / インレット関連用品 / GCインレットアダプタ / Open-Top Uniliner Liner, 0.32 and 0.53 mm ID, Direct Injection Only, for 1/4" Packed Injection Port Conversion, Standard Deactivation, w/Deactivated Wool, 5-pk.
Restek
Open-Top Uniliner Liner, 0.32 and 0.53 mm ID, Direct Injection Only, for 1/4" Packed Injection Port Conversion, Standard Deactivation, w/Deactivated Wool, 5-pk.
  1. Open-Top Uniliner Liner, 0.32 and 0.53 mm ID, Direct Injection Only, for 1/4" Packed Injection Port Conversion, Standard Deactivation, w/Deactivated Wool, 5-pk.

Open-Top Uniliner Liner, 0.32 and 0.53 mm ID, Direct Injection Only, for 1/4" Packed Injection Port Conversion, Standard Deactivation, w/Deactivated Wool, 5-pk.

カタログ番号 20316
Open-Top Uniliner Liner, 0.32 and 0.53 mm ID, Direct Injection Only, for 1/4" Packed Injection Port Conversion, Standard Deactivation, w/Deactivated Wool, 5-pk.

Open-Top Uniliner Liner, 0.32 and 0.53 mm ID, Direct Injection Only, for 1/4" Packed Injection Port Conversion, Standard Deactivation, w/Deactivated Wool, 5-pk.

概要

特徴＆利点
  • Reduces solvent tailing.
  • Versatile—0.53 mm ID version can be used in the direct (DI) or on-column (OC) injection mode.
  • Incorporates a gentle taper that seals the column and reduces dead volume in direct injection mode.
製品詳細
On-column injections can be performed only with 0.53 mm ID columns because 26-gauge needles do not fit into the bore of 0.32 mm ID columns, or into the Uniliner liner taper.

Note: a Uniliner liner must be used with a Uniliner liner adaptor (cat.# 20310 or 20311) for 1/4-inch injection ports. Remember to include a liner adaptor when ordering a Uniliner liner, unless you are purchasing replacement Uniliner liners.

仕様

製品仕様
カタログ番号
20316
製品名
Open-Top Uniliner Liner, 0.32 and 0.53 mm ID, Direct Injection Only, for 1/4" Packed Injection Port Conversion, Standard Deactivation, w/Deactivated Wool, 5-pk.