Potency testing is one of the critical workflows for the chemical analysis of cannabis. In order for this analysis to be most effective, we need to prepare our samples carefully, including a filtration step, and then analyze via liquid chromatography with a UV detector. We’ll walk through the steps of this important analysis with some commercially available CBD oils.
Restek Recommended Tools & Parts
Rimaniamo in contatto:
Thanks for joining us for this video where we’ll discuss a critical workflow for cannabis analysis. We’re going to demonstrate the High-Throughput Analysis of Cannabinoids by LC-UV. We’re specifically going to be looking at cannabinoids in CBD oils. For this workflow, you will need the following items:
Thompson SINGLE StEP vials, a Raptor ARC-18 analytical column, the matching guard column and an EXP direct connect holder.
Our first step is to pipette 50 µl of CBD oil, and then extract the sample with 950 µl of methanol, followed by vortexing for 30 seconds at 3000 rpm. Next, a 750 µl sample solution is placed into a new amber vial. We then add 250 µl of water into this in order to initiate matrix precipitation.
Now, vortex the new sample solution again, this time for 10 seconds at 3000 rpm. Next, we need to filter our sample. This is traditionally done using syringe filters; however, this is a labor-intensive sample prep technique especially when preparing multiple samples. We can prepare samples faster and generate less waste by using Thomson SINGLE StEP filter vials.
Place 400 ul of the sample extract into a Thomson SINGLE StEP filter vial. Then, place the plunger inside the filter vial and depress it to filter the sample extract. This allows the sample extract to pass through the membrane, filtering out particulates.
Once all of your samples are prepped, place them in the autosampler tray. Before you start your analysis, make sure your mobile phases are freshly prepared and that you have sufficient mobile phase for the number of samples you are analyzing. In addition, using Bluestem filters helps provide clean mobile phase to extend the lifetime of your column and pump seals. For this method, we use a Raptor ARC-18 analytical column and guard cartridge. Place a Raptor ARC-18 EXP guard cartridge into the direct connect holder.
Once you’ve established the method according to your lab’s validation SOPs, now you’re ready to run your samples and collect data. All compounds are resolved in this fast 9-minute analysis, making the method suitable for high-throughput cannabis testing labs. In addition, this analysis uses a simple isocratic mobile phase that's easily transferable between instruments, compared to more complex methods that incorporate atypical mobile phase gradients or additives.
Thank you for joining us as we demonstrated this workflow solution for the analysis of cannabinoids in CBD oil. You can find all of the necessary details of both the featured application and my poster containing information regarding the analysis of cannabinoids in CBD oils in the links below or at www.restek.com