Restek is pleased to release a new retention time index standard that contains both odd and even hydrocarbons C7-C33, making it appropriate for a wide range of retention index systems. Produced and tested in accordance with Restek’s ISO Guide 34 and 17025 accreditation, this certified reference material (CRM) is verified to be stable and accurate and is qualitatively analyzed to confirm composition. A certificate is available for each CRM lot.
Learn more at www.restek.com
Ethylene oxide and 1,4-dioxane are considered probable carcinogens by the U.S. EPA and International Agency for Research on Cancer respectively. These compounds are impurities in polyethylene glycol (PEG), but because of the potential danger they pose to humans, they must be removed before PEG can be used as a thickener / softener in cosmetics and personal care products.
Restek has formulated the only off-the-shelf suite of reference standards targeted toward the analysis of PEG-based products to make it easier for labs to verify the safety of shampoos, hand creams, and more. Produced with the specific concentrations needed in the industry, these newest Restek® certified reference materials (CRMs) are quantitatively tested to confirm their composition, and detailed support documentation is provided with each purchase. Because they are manufactured and QC-tested in Restek’s ISO-accredited labs, they also help satisfy ISO requirements.
With the release of these new ready-made reference standards, contract labs and manufacturers of PEG-based cosmetics and personal care products no longer need to order custom standards or make their own mixes.
Stop spending your time and money developing LC-MS/MS multi-residue pesticide methods and mixing reference standards when you could be running samples! Restek’s trusted food safety experts have already done the work for you—with guaranteed accuracy and at a lower cost.
Restek’s new certified reference materials (CRMs) for LC-MS/MS multi-residue pesticide analysis eliminate the need to source, purchase, and store individual materials along with the need to prepare your own mixes. Choose separate ampuls for mix-and-match customization or a complete kit that contains 204 compounds of interest, covering many LC-determined pesticides listed by government agencies. Designed for maximum shelf life, stability, and chromatographic performance, each standard ships with support documentation detailing Restek’s rigorous in-house quantitative testing. They even offer an optimized multi-residue pesticide method—including conditions and downloadable transition tables—free of charge.
Set up, verify, and validate your pesticide-screening methods in less time, with proven confidence, and at a significantly reduced cost by turning to Restek’s ISO-accredited labs for your LC-MS/MS multi-residue pesticide certified reference materials. For added convenience and unbeatable results, also consider their internal standards, Ultra and Pinnacle® DB LC columns, and Q-sep™ QuEChERS sample prep products.
Learn more at www.restek.com/LC-multiresidue
In support of the U.S. Safe Drinking Water Act (SDWA), Restek has formulated a complete set of EPA 524.3 reference standards for the monitoring of purgeable organic compounds in drinking water—using as few as three ampuls! This collection of certified reference materials (CRMs) also covers the seven volatile organic compounds (VOCs) included in the Unregulated Contaminant Monitoring Rule 3 (UCMR3), which requires monitoring of all public drinking water systems with 10,000 or more customers. It is also ideal for surface water and groundwater testing inside or outside the U.S.
This new set of reference standards offers a full 82-component EPA 524.3 list using as few as three ampuls to reduce prep time and chances for error or contamination. The EPA 524.3 VOA MegaMix® ampul includes the required oxygenates group for convenient ordering, while the volatile gases are prepared separately to allow replacement of shorter-life components without wasting money on the full list. Internal and surrogate standards are available independently or as a combined mix, letting analysts choose the option that works best for them. Of course, like all Restek certified reference materials (CRMs), they are manufactured and QC-tested in an ISO-accredited lab to easily satisfy ISO requirements.
Simplify your EPA 524.3 analyses and start saving today with Restek’s new reference standards set.
- Satisfy regulatory requirements by sourcing certified reference materials (CRMs) from an accredited supplier.
- Benefit from the exceptional product quality and customer service needed to meet strict ISO 9001, Guide 34, and 17025 guidelines.
- Get the same reliability and documentation with custom-formulated solutions as you do with stock standards—both fall under Restek’s accreditation.
- Consolidate orders by purchasing primary- and secondary-source reference standards, GC and LC columns, sample prep supplies, and accessories from one vendor.
Effective 9 December 2011, Restek’s reference standard manufacturing and QC testing laboratories in Bellefonte, PA, have added ISO Guide 34 and 17025 accreditations to their credentials. Issued by the American Association for Laboratory Accreditation (A2LA), these accreditations—as well as the company’s ISO 9001 registration, which has been maintained since 1994—serve as recognition that Restek and its labs meet the world-class quality standards established by the International Organization for Standardization (ISO).
Many laboratories are required to purchase certified reference materials (CRMs), which are only manufactured and QC tested at ISO-accredited labs like Restek’s. But, even those who do not operate under such restrictions will still benefit from the quality, reliability, and consistency of CRMs. Accredited labs must also have rigorous corrective action and customer satisfaction systems in place, so when you order reference standards from Restek, you can trust that you will receive superior quality and service.
In addition to a full line of options that are in stock and ready to ship, Restek’s custom reference standards are also covered by its ISO Guide 34 and 17025 accreditations. Whether you need something right out of the catalog or a custom-formulated solution, Restek can satisfy all of your primary- and secondary-source certified reference material needs—along with GC and LC columns, sample prep supplies, and accessories. And, you can access documentation for all Restek reference standards online for instant access any time.
To learn more about Restek’s ISO quality credentials and to view the certificates (including scopes of accreditation), please click here or call Restek Corporation at 1-814-353-1300, ext. 3.