Phthalate Esters by U.S. EPA Method 606 on MXT-5

Injection
Column	MXT-5, 30 m, 0.53 mm ID, 1.00 µm (cat.# 70255)
Standard/Sample	606 Phthalate esters calibration mix (cat.# 31031)
Conc.:	50 ng per component
Inj. Vol.:	0.5 µL split (split ratio 50:1)
Inj. Temp.:	300 °C
Oven
Oven Temp.:	40 °C (hold 6 min) to 300 °C at 10 °C/min (hold 15 min)
Carrier Gas	H₂, constant linear velocity
Linear Velocity:	50 cm/sec

Detector	FID @ 300 °C
Notes	FID sensitivity: 8 x 10-11 AFS

Download PDF