EPA Method 525.3 ONP Calibration Standard (with 525.3 Internal and Surrogate Standards) on the Rxi-5Sil MS

	Peaks	t_R (min)
1.	1,3-Dimethyl-2-nitrobenzene (SS)	7.03
2.	S-Ethyl dipropylthiocarbamate (EPTC)	9.38
3.	Butylate	10.32
4.	Vernolate	10.55
5.	Etridiazole	10.60
6.	2,6-Dinitrotoluene	10.67
7.	Pebulate	10.73
8.	Acenaphthene-D10 (IS)	11.08
9.	Butylated hydroxytoluene (BHT)	11.30
10.	Tebuthiuron	11.46
11.	2,4-Dinitrotoluene	11.61
12.	Molinate	11.75
13.	N,N-Diethyl-meta-toluamide (DEET)	12.14
14.	Propachlor	12.51
15.	Cycloate	12.87
16.	Chlorpropham	13.09
17.	Trifluralin	13.17

Injection
Column	Rxi^®-5Sil MS, 30 m, 0.25 mm ID, 0.25 µm (cat.# 13623)
Sample	EPA Method 525.3 ONP cal standard (cat.# 32544)
	EPA Method 525.3 PAH IS mix (cat.# 32547)
	EPA Method 525.3 PCP IS (cat.# 32548)
	EPA Method 525.3 surrogate standard (cat.# 32549)
Diluent:	Ethyl acetate
Conc.:	2 µg/mL
Inj. Vol.:	1 µL pulsed splitless (hold 1 min)
Liner:	Premium 4 mm single taper w/wool (cat.# 23303.1)
Inj. Temp.:	275 °C
Pulse Pressure:	30 psi (206.8kPa)
Pulse Time:	1 min
Purge Flow:	80 mL/min
Oven
Oven Temp.:	70 °C (hold 1 min) to 200 °C at 10 °C/min to 320 °C at 7 °C/min (hold 3 min)
Carrier Gas	He, constant flow
Flow Rate:	1.2 mL/min

Detector

Mode:

Scan

Scan Program:

Group	Start Time (min)	Scan Range (amu)	Scan Rate (scans/sec)
1	5	45-550	5.5

Transfer Line Temp.:

280 °C

Analyzer Type:

Quadrupole

Source Type:

Extractor

Extractor Lens:

6 mm ID

Source Temp.:

350 °C

Quad Temp.:

200 °C

Solvent Delay Time:

5 min

Tune Type:

DFTPP

Ionization Mode:

Instrument

Agilent 7890B GC & 5977A MSD

Download PDF