Your web browser will no longer be supported by Restek.com as of 30 June 2021.
To avoid any interruption in access or functionality, install a current-generation web browser now. Learn more.
Peaks | |
---|---|
1. | Heptane |
2. | C3 oxide |
3. | Benzene |
4. | Toluene |
5. | Ethylbenzene |
6. | p-Xylene |
7. | m-Xylene |
8. | Cumene |
9. | o-Xylene |
10. | Styrene |
11. | 2-Methylpentanol |
12. | p-Diethylbenzene |
Peaks | |
---|---|
13. | m-Diethylbenzene |
14. | α-Methylstyrene |
15. | o-Diethylbenzene |
16. | Phenylacetylene (trace) |
17. | Benzaldehyde |
18. | Monopropylene glycol |
19. | Acetophenone |
20. | 2-Phenyl-2-propanol |
21. | α-Methylbenzyl alcohol |
22. | Benzyl Alcohol |
23. | Phenylethyl Alcohol |
24. | Phenol |
Column | Stabilwax, 30 m, 0.53 mm ID, 1.00 µm (cat.# 10655) |
---|---|
Standard/Sample | synthetic blend |
Conc.: | 15 to 30 ng/µL |
Injection | |
Inj. Vol.: | 0.2 µL Direct |
Liner: | Uniliner liner |
Inj. Temp.: | 220 °C |
Oven | |
Oven Temp.: | 45 °C (hold 4 min) to 220 °C at 6 °C/min |
Carrier Gas | H2, constant flow |
Linear Velocity: | 40 cm/sec |
Detector | FID @ 220 °C |
---|---|
Notes | FID sensitivity: 16 x 10-11 AFS Flow rate: 5.1 cc/min |
We have determined your location as:
Or select your location below:
Sorry! We are unable to determine your location. Please select your location below.